Engine Components: Cylinder Heads

Edelbrock Performer RPM SBF Heads

Descripción:
Edelbrock Performer RPM cylinder heads provide out-of-the-box bolt on performance with no additional porting required. Intake and exhaust runners are CNC profiled for superior airflow performance. Standard port locations enable use of stock or performance exhausts. Hardened valve seats for use with unleaded fuel. We stock these heads fully assembled and ready to bolt on, equipped with 1-piece swirl-polished undercut stem valves, seals, valve springs, retainers, keepers, rocker studs and hardened guide plates. Edelbrock Performer RPM heads are a great way to dramatically improve the performance of engines equipped with original equipment or cast iron heads. Match these heads with Performer RPM package for dramatic power increase from 1500-6500 rpm in high performance streetcars. Designed for 289/302 and 351Windsor Ford engines. These heads are fitted with 2.02." intake valves for use with aftermarket pistons with large valve relief e.g. KB116. If using stock style pistons, use cylinder heads EDEL6022. 60cc combustion chamber, 2.02" Intake 1.60" Exhaust valve. Fitted with 3/8" diameter rocker studs (requires use of adjustable 3/8" roller rockers). Maximum valve lift .575". Use intake manifolds for 289/302 EDEL7121, EDEL5021 or EDEL2921. Use intake manifolds for 351Windsor EDEL7181, EDEL5081 or EDEL2981. Use head bolts *********for 289/302 engines (7/16") or ********** for 351W engines with 1/2" head bolts. Use head bolt bushing kit on 289/302 engines with 7/16" head bolts (not required on 351W engines with 1/2" head bolts). Use head gasket FEL1011-1 or FEL1011-2. Use Intake gasket FEL1250. Use roller rockers e.g. RUK66911C.
Fabricante:
Edelbrock
PVP:
IVA incluído:

Edelbrock Performer RPM SBF Heads 1.90 Int

Descripción:
Edelbrock Performer RPM cylinder heads provide out-of-the-box bolt on performance with no additional porting required. Intake and exhaust runners are CNC profiled for superior airflow performance. Standard port locations enable use of stock or performance exhausts. Hardened valve seats for use with unleaded fuel. We stock these heads fully assembled and ready to bolt on, equipped with 1-piece swirl-polished undercut stem valves, seals, valve springs, retainers, keepers, rocker studs and hardened guide plates. Edelbrock Performer RPM heads are a great way to dramatically improve the performance of engines equipped with original equipment or cast iron heads. Match these heads with Performer RPM package for dramatic power increase from 1500-6500 rpm in high performance streetcars. Designed for 289/302 and 351Windsor Ford engines. These heads are fitted with 1.90" intake valves (smaller than the 2.02" fitted in EDEL6025) to clear stock style pistons. 60cc combustion chamber, 1.90" Intake 1.60" Exhaust valve. Fitted with 3/8" diameter rocker studs (requires use of adjustable 3/8" roller rockers). Maximum valve lift .575". If using aftermarket pistons with large valve relief e.g. KB116 the alternative heads EDEL6025 may be used for small additional top end performance. Use intake manifolds for 289/302 EDEL7121, EDEL5021 or EDEL2921. Use intake manifolds for 351Windsor EDEL7181, EDEL5081 or EDEL2981. Use head bolts *********for 289/302 engines (7/16") or ********** for 351W engines with 1/2" head bolts. Use head bolt bushing kit on 289/302 engines with 7/16" head bolts (not required on 351W engines with 1/2" head bolts). Use head gasket FEL1011-1 or FEL1011-2. Use Intake gasket FEL1250. Use roller rockers e.g. RUK66911C.
Fabricante:
Edelbrock
PVP:
IVA incluído:

Edelbrock RPM 64cc SBC Angle Plug Heads

Descripción:
Edelbrock Performer RPM cylinder heads provide out-of-the-box bolt on performance with no additional porting required. Intake and exhaust runners are CNC profiled for superior airflow performance. Standard port locations enable use of stock or performance exhausts. Hardened valve seats for use with unleaded fuel. We stock these heads fully assembled and ready to bolt on, equipped with 1-piece swirl-polished undercut stem valves, seals, valve springs, retainers, keepers, rocker studs and hardened guide plates. Edelbrock Performer RPM heads are a great way to dramatically improve the performance of engines equipped with original equipment or cast iron heads. Match these heads with Performer RPM package for dramatic power increase from 1500-6500 rpm in high performance streetcars. Designed for small block Chevrolet V8 engines. These heads have angled spark plug locations – for straight plug heads use EDEL6073 or EDEL6089. 64cc combustion chamber, 2.02" Intake 1.60" Exhaust valve. Fitted with 3/8" diameter rocker studs. Maximum valve lift .575". Use intake manifolds EDEL7101, EDEL5001 or EDEL2975. Use head bolts ARP1343601. Use head gasket FEL1003 or FEL1010 or FEL1014. Use Intake gasket FEL1205. Use roller rockers e.g. RUK66928C.
Fabricante:
Edelbrock
PVP:
IVA incluído:

Edelbrock RPM 64cc SBC Straight Plug Heads

Descripción:
Edelbrock Performer RPM cylinder heads provide out-of-the-box bolt on performance with no additional porting required. Intake and exhaust runners are CNC profiled for superior airflow performance. Standard port locations enable use of stock or performance exhausts. Hardened valve seats for use with unleaded fuel. We stock these heads fully assembled and ready to bolt on, equipped with 1-piece swirl-polished undercut stem valves, seals, valve springs, retainers, keepers, rocker studs and hardened guide plates. Edelbrock Performer RPM heads are a great way to dramatically improve the performance of engines equipped with original equipment or cast iron heads. Match these heads with Performer RPM package for dramatic power increase from 1500-6500 rpm in high performance streetcars. Designed for small block Chevrolet V8 engines. These heads have straight (original style) spark plug locations – for angled plug heads use EDEL6071 or EDEL6099. 64cc combustion chamber, 2.02" Intake 1.60" Exhaust valve. Fitted with 3/8" diameter rocker studs. Maximum valve lift .575". Use intake manifolds EDEL7101, EDEL5001 or EDEL2975. Use head bolts ARP1343601. Use head gasket FEL1003 or FEL1010 or FEL1014. Use Intake gasket FEL1205. Use roller rockers e.g. RUK66928C.
Fabricante:
Edelbrock
PVP:
IVA incluído:

Edelbrock RPM 70 cc SBC Angle Plug Heads

Descripción:
Edelbrock Performer RPM cylinder heads provide out-of-the-box bolt on performance with no additional porting required. Intake and exhaust runners are CNC profiled for superior airflow performance. Standard port locations enable use of stock or performance exhausts. Hardened valve seats for use with unleaded fuel. We stock these heads fully assembled and ready to bolt on, equipped with 1-piece swirl-polished undercut stem valves, seals, valve springs, retainers, keepers, rocker studs and hardened guide plates. Edelbrock Performer RPM heads are a great way to dramatically improve the performance of engines equipped with original equipment or cast iron heads. Match these heads with Performer RPM package for dramatic power increase from 1500-6500 rpm in high performance streetcars. Designed for small block Chevrolet V8 engines. These heads have angled spark plug locations – for straight plug heads use EDEL6073 or EDEL6089. 70cc combustion chamber, 2.02" Intake 1.60" Exhaust valve. Fitted with 3/8" diameter rocker studs. Maximum valve lift .575". Use intake manifolds EDEL7101, EDEL5001 or EDEL2975. Use head bolts ARP1343601. Use head gasket FEL1003 or FEL1010 or FEL1014. Use Intake gasket FEL1205. Use roller rockers e.g. RUK66928C.
Fabricante:
Edelbrock
PVP:
IVA incluído:

Edelbrock RPM 70cc SBC Straight Plug Heads

Descripción:
Edelbrock Performer RPM cylinder heads provide out-of-the-box bolt on performance with no additional porting required. Intake and exhaust runners are CNC profiled for superior airflow performance. Standard port locations enable use of stock or performance exhausts. Hardened valve seats for use with unleaded fuel. We stock these heads fully assembled and ready to bolt on, equipped with 1-piece swirl-polished undercut stem valves, seals, valve springs, retainers, keepers, rocker studs and hardened guide plates. Edelbrock Performer RPM heads are a great way to dramatically improve the performance of engines equipped with original equipment or cast iron heads. Match these heads with Performer RPM package for dramatic power increase from 1500-6500 rpm in high performance streetcars. Designed for small block Chevrolet V8 engines. These heads have straight (original style) spark plug locations – for angled plug heads use EDEL6071 or EDEL6099. 70cc combustion chamber, 2.02" Intake 1.60" Exhaust valve. Fitted with 3/8" diameter rocker studs. Maximum valve lift .575". Use intake manifolds EDEL7101, EDEL5001 or EDEL2975. Use head bolts ARP1343601. Use head gasket FEL1003 or FEL1010 or FEL1014. Use Intake gasket FEL1205. Use roller rockers e.g. RUK66928C.
Fabricante:
Edelbrock
PVP:
IVA incluído:

Edelbrock Victor Junior 64cc SBC Heads

Descripción:
Edelbrock Victor Junior cylinder heads are designed for maximum horsepower. They are ideal for many types of competition and ultra-high performance street machines. They provide out-of-the-box bolt on performance with a potential of 530-580 HP. These heads feature large volume high flowing intake ports and .300" raised exhaust ports. They have CNC gasket-matched port entries/exits with blended valve bowls. Heads have a 9/16" thick deck surface for superior gasket retention and spark plug holes are angled for maximum performance. Hardened valve seats are used for unleaded fuel. We stock these heads fully assembled and ready to bolt on, equipped with 1-piece swirl-polished undercut stem valves, seals, valve springs, retainers, keepers, rocker studs and hardened guide plates. These heads need to be matched to compatible high performance engine components and should not be used on otherwise stock engines. Designed for small block Chevrolet V8 engines using mechanical flat tappet or hydraulic roller cams. 64cc combustion chamber, 2.08" Intake 1.60" Exhaust valve. Fitted with 7/16" diameter rocker studs. Maximum valve lift .650". Use intake manifold EDEL2975 . Use head bolts ARP1343601. Use head gasket FEL1003 or FEL1010 or FEL1014. Use Intake gasket FEL1206. Use high performance roller rockers for 7/16" stud.
Fabricante:
Edelbrock
PVP:
IVA incluído:

Edelbrock Victor Junior 70cc SBC Heads

Descripción:
Edelbrock Victor Junior cylinder heads are designed for maximum horsepower. They are ideal for many types of competition and ultra-high performance street machines. They provide out-of-the-box bolt on performance with a potential of 530-580 HP. These heads feature large volume high flowing intake ports and .300" raised exhaust ports. They have CNC gasket-matched port entries/exits with blended valve bowls. Heads have a 9/16" thick deck surface for superior gasket retention and spark plug holes are angled for maximum performance. Hardened valve seats are used for unleaded fuel. We stock these heads fully assembled and ready to bolt on, equipped with 1-piece swirl-polished undercut stem valves, seals, valve springs, retainers, keepers, rocker studs and hardened guide plates. These heads need to be matched to compatible high performance engine components and should not be used on otherwise stock engines. Designed for small block Chevrolet V8 engines using mechanical flat tappet or hydraulic roller cams. 70cc combustion chamber, 2.08" Intake 1.60" Exhaust valve. Fitted with 7/16" diameter rocker studs. Maximum valve lift .650". Use intake manifold EDEL2975. Use head bolts ARP1343601. Use head gasket FEL1003 or FEL1010 or FEL1014. Use Intake gasket FEL1206. Use high performance roller rockers for 7/16" stud.
Fabricante:
Edelbrock
PVP:
IVA incluído:

Edelbrock Victor Junior 70cc SBC Heads

Descripción:
Edelbrock Victor Junior cylinder heads are designed for maximum horsepower. They are ideal for many types of competition and ultra-high performance street machines. They provide out-of-the-box bolt on performance with a potential of 530-580 HP. These heads feature large volume high flowing intake ports and .300" raised exhaust ports. They have CNC gasket-matched port entries/exits with blended valve bowls. Heads have a 9/16" thick deck surface for superior gasket retention and spark plug holes are angled for maximum performance. Hardened valve seats are used for unleaded fuel. We stock these heads fully assembled and ready to bolt on, equipped with 1-piece swirl-polished undercut stem valves, seals, valve springs, retainers, keepers, rocker studs and hardened guide plates. These heads need to be matched to compatible high performance engine components and should not be used on otherwise stock engines. Designed for small block Chevrolet V8 engines using mechanical roller cams. 70cc combustion chamber, 2.08" Intake 1.60" Exhaust valve. Fitted with 7/16" diameter rocker studs. Maximum valve lift .650". Use intake manifold EDEL2975 . Use head bolts ARP1343601. Use head gasket FEL1003 or FEL1010 or FEL1014. Use Intake gasket FEL1206. Use high performance roller rockers for 7/16" stud.
Fabricante:
Edelbrock
PVP:
IVA incluído:

Edelbrock Victor Junior SBF Heads

Descripción:
Edelbrock Victor Junior cylinder heads are designed for maximum horsepower. They are ideal for many types of competition and ultra-high performance street machines. They provide out-of-the-box bolt on performance with a potential of 500+ HP. These heads feature large volume high flowing intake ports and .130" raised exhaust ports. They have CNC gasket-matched port entries/exits with blended valve bowls. The spark plug holes and valves are in the stock location with a valve cover that is raised .150". Hardened valve seats are used for unleaded fuel. We stock these heads fully assembled and ready to bolt on, equipped with 1-piece swirl-polished undercut stem valves, seals, valve springs, retainers, keepers, rocker studs and hardened guide plates. These heads need to be matched to compatible high performance engine components and should not be used on otherwise stock engines. Designed for small block Ford V8 engines using mechanical flat tappet or hydraulic roller cams. Alternate head EDEL7719. 60cc combustion chamber, 2.05" Intake 1.60" Exhaust valve. Fitted with 7/16" diameter rocker studs. Maximum valve lift .650". Use intake manifolds EDEL2921 for 289/302 and EDEL2981 for 351W. Use head bolts *********for 289/302 engines (7/16") or ********** for 351W engines with 1/2" head bolts. Use head bolt bushing kit on 289/302 engines with 7/16" head bolts (not required on 351W engines or 302 fitted with 1/2" head bolts). Use head gasket FEL1011-1 or FEL1011-2. Use Intake gasket FEL1262. Use roller rockers e.g. *********.
Fabricante:
Edelbrock
PVP:
IVA incluído:

Edelbrock Victor Junior SBF Heads

Descripción:
Edelbrock Victor Junior cylinder heads are designed for maximum horsepower. They are ideal for many types of competition and ultra-high performance street machines. They provide out-of-the-box bolt on performance with a potential of 500+ HP. These heads feature large volume high flowing intake ports and .130" raised exhaust ports. They have CNC gasket-matched port entries/exits with blended valve bowls. The spark plug holes and valves are in the stock location with a valve cover that is raised .150". Hardened valve seats are used for unleaded fuel. We stock these heads fully assembled and ready to bolt on, equipped with 1-piece swirl-polished undercut stem valves, seals, valve springs, retainers, keepers, rocker studs and hardened guide plates. These heads need to be matched to compatible high performance engine components and should not be used on otherwise stock engines. Designed for small block Ford V8 engines using mechanical roller cams. Alternate head EDEL7718. 60cc combustion chamber, 2.05" Intake 1.60" Exhaust valve. Fitted with 7/16" diameter rocker studs. Maximum valve lift .650". Use intake manifolds EDEL2921 for 289/302 and EDEL2981 for 351W. Use head bolts *********for 289/302 engines (7/16") or ********** for 351W engines with 1/2" head bolts. Use head bolt bushing kit on 289/302 engines with 7/16"s; head bolts (not required on 351W engines or 302 fitted with 1/2" head bolts). Use head gasket FEL1011-1 or FEL1011-2. Use Intake gasket FEL1262. Use roller rockers e.g. *********.
Fabricante:
Edelbrock
PVP:
IVA incluído:

Edelbrock Victor SBF Heads Bare

Descripción:
Edelbrock Victor cylinder heads are designed for ultra high-performance and large displacement small-blocks. They are designed for competition but can be used in extreme ultra-high performance street machines. These heads have not been port-matched or bowl-blended and require professional head preparation. They feature 5/8" thick deck surface for maximum strength and gasket retention, ultra-precise CNC-machining, ductile iron valve seats and manganese-bronze guides. These heads will require special shaft-mount rocker arm assemblies and special aftermarket pistons. These heads are sold bare – no valves or springs etc. Heads feature revised exhaust port and header bolt spacing – header flange plates available EDEL7722. These heads need to be matched to compatible high performance engine components and should not be used on otherwise stock engines. Designed for small block Ford V8 engines and will also fit 351C with modifications. 47cc combustion chamber, 2.125" Intake 1.625" Exhaust valve. Use intake manifolds EDEL2921 for 289/302 and EDEL2981 for 351W. Use head bolts *********for 289/302 engines (7/16") or ********** for 351W engines with 1/2" head bolts. Use head bolt bushing kit on 289/302 engines with 7/16" head bolts (not required on 351W engines or 302 fitted with 1/2" head bolts) we recommend 302 engines fitted with 7/16" head bolts be converted to 1/2 size. Use head gasket FEL1011-1 or FEL1011-2. Use Intake gasket FEL1262.
Fabricante:
Edelbrock
PVP:
IVA incluído:

© 2024 Mallorca Custom Marine