Engine Components: Camshafts

Cam SBC Flat Hyd 300+HP

Descripción:
Speed-Pro hydraulic flat tappet camshaft for street use. Dyno results show this camshaft can produce 300HP in an 8.7:1 compression engine. A good first choice when replacing a stock cam. Customer must ensure adequate piston to valve clearance, valve spring clearance etc for their own application, however this cam will usually install straight into a stock Chevrolet 350 with little or no major modifications. Smooth idle quality. Designed for Small Block Chevrolet pre-86 style. Advertised duration 277 Int, 288 Exh. Lift at valve .420 Int, .443 Exh
Fabricante:
Federal Mogul
PVP:
IVA incluído:

Cam SBC Flat Hydr 350HP

Descripción:
Speed-Pro hydraulic flat tappet camshaft for street use. Dyno results show this camshaft can produce 350HP in a 9.5:1 compression engine. A good choice for achieving increase in power for road use. This cam matched with Edelbrock RPM heads, hardened pushrods, RPM or Torker intake and EDEL1405 carb will produce an economic high power upgrade from a stock engine, yet have good idle and power quality. Can also be used with modified stock heads but will require upgraded valve springs and valve-train etc. Customer must ensure adequate piston to valve clearance, valve spring clearance etc for their own application, however this cam will usually install straight into a stock Chevrolet 350 with Edelbrock RPM heads. Fair idle quality. Designed for Small Block Chevrolet pre-86 style. Advertised duration 304 Int, 287 Exh. Lift at valve .468 Int, .480 Exh.
Fabricante:
Federal Mogul
PVP:
IVA incluído:

Edelbrock Perf RPM Hyd Roller SBC Cam

Descripción:
Performer RPM camshafts are part of the Edelbrock power package. The Performer RPM package is designed for street high performance applications in the 1500-6500 rpm range. These cams provide significant power increases over stock but require the use of modified or aftermarket cylinder heads (Edelbrock RPM), high performance pistons with 9.5:1 compression, high volume oil pump etc. The Performer RPM package parts available include intake manifold, camshaft, carburettor, timing set and cylinder heads. This camshaft should be used in conjunction with the Performer RPM or Torker 11intakes. The Performer RPM camshaft when matched with the Performer RPM intake is a great choice for light vehicles with high performance engines. These hydraulic lifter camshafts are dyno matched to Performer RPM intake manifolds for high-rpm horsepower while maintaining acceptable low-end torque. The idle will be rougher in comparison to the Performer series. The roller tappets reduce friction, virtually eliminate break-in problems and permit higher valve velocities for increased performance. Intended for use with EDEL97383 hydraulic roller tappets (Retro-fit). Designed for street 283-400 Chevrolet V8 (1957-1986). Advertised duration 296 Int, 300 Exh. Lift at valve .539 Int, .548 Exh. Recommended carb EDEL1407 for most applications.
Fabricante:
Edelbrock
PVP:
IVA incluído:

Edelbrock Performer Plus Cam 351W/302

Descripción:
Performer camshafts are part of the Edelbrock power package. The Performer package is designed to greatly increase performance and driveability in the low to mid-rpm range. This is the first level of increase over stock. The Performer package parts available include intake manifold, camshaft, carburettor and cylinder heads. This camshaft can be used in conjunction with the Performer, Performer RPM or Torker 11intakes. The Performer camshaft when matched with the Performer intake is a good choice for otherwise stock or mild performance engines as power is produced from idle to 5500 rpm. The Performer cam produces a smooth idle with a major increase in throttle response and torque. Camshafts are supplied with hydraulic lifters, assembly lube and instructions. Designed for street 351 cubic inch Ford Windsor V8 and in Ford 302 when using the late 302/351W firing order of 1,3,7,2,6,5,4,8. Advertised duration 270 Int, 280 Exh. Lift at valve .448 Int, .472 Exh. Recommended carb EDEL1405 for most applications.
Fabricante:
Edelbrock
PVP:
IVA incluído:

Edelbrock Performer RPM 302 Cam

Descripción:
Performer RPM camshafts are part of the Edelbrock power package. The Performer RPM package is designed for street high performance applications in the 1500-6500 rpm range and will dramatically increase performance over stock engines. These cams provide significant power increases over stock but require the use of modified or aftermarket cylinder heads (Edelbrock RPM), and other engine modifications are recommended such as improved oil system, adjustable roller rockers and high performance pistons with 9.5: 1 compression. The Performer RPM package parts available include intake manifold, camshaft, carburettor, timing set and cylinder heads. This camshaft should be used in conjunction with the Performer RPM or Torker 11intakes. The Performer RPM camshaft when matched with the Performer RPM intake is a great choice for light vehicles with high performance engines, this cam is not for heavy vehicles. These hydraulic lifter camshafts are dyno matched to Performer RPM intake manifolds for high-rpm horsepower while maintaining acceptable low-end torque. The idle will be rougher in comparison to the Performer series. Camshaft is supplied with hydraulic lifters, assembly lube and instructions. This is a hydraulic flat tappet camshaft roller camshaft also available EDEL2221. Designed for street 289-302 Ford V8. This cam uses early firing order but can be used in 1986 and later engines by adopting the early firing order. Advertised duration 290 Int, 300 Exh. Lift at valve .496 Int, .520 Exh. Recommended carb EDEL1405, EDEL1407 for most applications.
Fabricante:
Edelbrock
PVP:
IVA incluído:

Edelbrock Performer RPM 351W Cam

Descripción:
Performer RPM camshafts are part of the Edelbrock power package. The Performer RPM package is designed for street high performance applications in the 1500-6500 rpm range and will dramatically increase performance over stock engines. These cams provide significant power increases over stock but require the use of modified or aftermarket cylinder heads (Edelbrock RPM), and other engine modifications are recommended such as improved oil system, adjustable roller rockers and high performance pistons with 9.5:1 compression. The Performer RPM package parts available include intake manifold, camshaft, carburettor, timing set and cylinder heads. This camshaft should be used in conjunction with the Performer RPM or Torker 11intakes. The Performer RPM camshaft when matched with the Performer RPM intake is a great choice for light vehicles with high performance engines, this cam is not for heavy vehicles. These hydraulic lifter camshafts are dyno matched to Performer RPM intake manifolds for high-rpm horsepower while maintaining acceptable low-end torque. The idle will be rougher in comparison to the Performer series. Camshaft is supplied with hydraulic lifters, assembly lube and instructions. This is a hydraulic flat tappet camshaft. Designed for street 351 Windsor Ford V8. Advertised duration 290 Int, 300 Exh. Lift at valve .496 Int, .520 Exh. Recommended carb EDEL1407 for most applications.
Fabricante:
Edelbrock
PVP:
IVA incluído:

Edelbrock Performer RPM 390-428 FE Cam

Descripción:
Performer RPM camshafts are part of the Edelbrock power package. The Performer RPM package is designed for street high performance applications in the 1500-6500 rpm range and will dramatically increase performance over stock engines. These cams provide significant power increases over stock but require the use of modified or aftermarket cylinder heads (Edelbrock RPM), and other engine modifications are recommended such as improved oil system, adjustable roller rockers and high performance pistons with 9.5:1 compression. The Performer RPM package parts available include intake manifold, camshaft, carburettor, timing set and cylinder heads. This camshaft should be used in conjunction with the Performer RPM or Torker 11intakes. The Performer RPM camshaft when matched with the Performer RPM intake is a great choice for light vehicles with high performance engines, this cam is not for heavy vehicles. These hydraulic lifter camshafts are dyno matched to Performer RPM intake manifolds for high-rpm horsepower while maintaining acceptable low-end torque. The idle will be rougher in comparison to the Performer series. Camshaft is supplied with hydraulic lifters, assembly lube and instructions. This is a hydraulic flat tappet camshaft. Designed for street Ford 390-428 engines. Advertised duration 296 Int, 296 Exh. Lift at valve .572 Int, .572 Exh. Recommended carb EDEL1407 for most applications.
Fabricante:
Edelbrock
PVP:
IVA incluído:

Edelbrock Performer RPM SBC Cam

Descripción:
Performer RPM camshafts are part of the Edelbrock power package. The Performer RPM package is designed for street high performance applications in the 1500-6500 rpm range and will dramatically increase performance over stock engines. These cams provide significant power increases over stock but require the use of modified or aftermarket cylinder heads (Edelbrock RPM), and other engine modifications are recommended such as improved oil system, adjustable roller rockers and high performance pistons with 9.5: 1 compression. The Performer RPM package parts available include intake manifold, camshaft, carburettor, timing set and cylinder heads. This camshaft should be used in conjunction with the Performer RPM or Torker 11intakes. The Performer RPM camshaft when matched with the Performer RPM intake is a great choice for light vehicles with high performance engines, this cam is not for heavy vehicles. These hydraulic lifter camshafts are dyno matched to Performer RPM intake manifolds for high-rpm horsepower while maintaining acceptable low-end torque. The idle will be rougher in comparison to the Performer series. Camshaft is supplied with hydraulic lifters, assembly lube and instructions. This is a hydraulic flat tappet camshaft roller camshaft also available EDEL2201. Designed for street 283-400 Chevrolet V8 (1957-1986). Advertised duration 308 Int, 318 Exh. Lift at valve .488 Int, .510 Exh. Recommended carb EDEL1407 for most applications.
Fabricante:
Edelbrock
PVP:
IVA incluído:

Edelbrock SBC Performer Plus Cam Set

Descripción:
Performer camshafts are part of the Edelbrock power package. The Performer package is designed to greatly increase performance and driveability in the low to mid-rpm range. This is the first level of increase over stock. The Performer package parts available include intake manifold, camshaft, carburettor and cylinder heads. This camshaft can be used in conjunction with the Performer, Performer RPM or Torker 11intakes. The Performer camshaft when matched with the Performer intake is a good choice for otherwise stock or mild performance engines as power is produced from idle to 5500 rpm. The Performer cam produces a smooth idle with a major increase in throttle response and torque. Camshafts are supplied with hydraulic lifters, assembly lube and instructions. Designed for street SBC 265-350 cu. in. Advertised duration 278 Int, 288 Exh. Lift at valve .420 Int, .442 Exh. Recommended carb EDEL1405 for most applications.
Fabricante:
Edelbrock
PVP:
IVA incluído:

© 2023 Mallorca Custom Marine