MCM > Piezas/Kits > Electrical & Ignition: Ignition Control & Access

Electrical & Ignition: Ignition Control & Access

MSD 6A Unit

Descripción:

MSD 6A ignition control unit. Provides powerful multiple sparks at high rpm for a more complete combustion and increase in power. Will also provide a high power spark at low rpm for increased fuel efficiency and ease of starting. This unit is designed for street and some race use and is required with most MSD distributors and will work with GM HEI and many other ignitions. Use with MSD8202 coil. Recommend also installing MSD8830 noise filter.

Fabricante:

MSD

PVP:

—

IVA incluído:

—

MSD 6AL Unit

Descripción:

MSD 6AL ignition control unit. Provides powerful multiple sparks at high rpm for a more complete combustion and increase in power. Will also provide a high power spark at low rpm for increased fuel efficiency and ease of starting. This unit is designed for street and some race use and is required with most MSD distributors and will work with GM HEI and many other ignitions. This unit is the same as MSD6200 except it also features a built in rev-limiter. The limiter drops cylinders in the firing order to reduce rpm, then fires these cylinders on the next cycle to prevent over fuelling. Adjustable rev limit with 3,000, 6,000, 7,000 and 8,000 rpm plug in modules supplied. Further specific module kits are available to purchase separately. Use with MSD8202 coil. Recommend also installing MSD8830 noise filter.

Fabricante:

MSD

PVP:

—

IVA incluído:

—

MSD Noise Filter

Descripción:

The MSD noise filter should be used if you experience radio noise after installing the MSD Ignition. It is also particularly good at preventing damage to the MSD during jump-starts and will keep a vehicle's 12volt line "clean" by removing any voltage and current surges that could interfere with the operation of the MSD and MSD accessories.

Fabricante:

MSD

PVP:

—

IVA incluído:

—